No products in the cart.
Roll over image to zoom in
Dwyer PBLT2-10-80 Submersible Level Transmitter
$1,016$1,219 (-17%)
Dwyer PBLT2-10-80 is a submersible level transmitter suitable for measuring liquid levels. It has a temperature range of 0 to 200°F and an accuracy of ±0.25% FS. The transmitter operates on a power requirement of 13 to 30 VDC and has a quick response time of 50 msec. It is encased in an IP68 rated enclosure and…
Dwyer PBLT2-10-80 is a submersible level transmitter suitable for measuring liquid levels. It has a temperature range of 0 to 200°F and an accuracy of ±0.25% FS. The transmitter operates on a power requirement of 13 to 30 VDC and has a quick response time of 50 msec. It is encased in an IP68 rated enclosure and features a 4 to 20 mA DC output signal. The transmitter is designed for suspended mounting in tanks and is made from 316 SS and 316L SS body materials with polyether polyurethane or ETFE cable and fluoroelastomer seals. It can withstand a pressure limit of 2X FS and is suitable for hazardous locations. The thermal effect is ±0.02% FS/°F and has a loop resistance of 900 Ω. The PBLT2-10-80 is equipped with lightning and surge protection for electrical safety.
Specifications
| Component | Submersible Level Transmitter |
|---|---|
| (Instrument-Sensor) Measurement Accuracy | 0.25% |
| (Instrument-Sensor) IP Protection | IP68 |
| (Instrument-Sensor) Application | Liquid |
| Manufacturer | Dwyer Instruments |
| (Instrument – Sensor) Supply Voltage | 10 – 28 VDC |
| (Instrument – Sensor) Supply Voltage | 13 – 30 VDC |
| (Instrument-Sensor) Temperature Range | -4 – 176 °F/-20 – 80°C |
| (Instrument-Sensor) Temperature Range | 0 – 200 °F/-18 – 93°C |
| (Instrument-Sensor) Temperature Range | -4 – 149 °F/-20 – 65°C |
Features
Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids
Increased life with lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on PBLT2 models
Eliminates particulate or water droplets from entering the transducer using maintenance-free filter
Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier
Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility
Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation
Minimal downtime with standard 72 hour lead time
Reviews
There are no reviews yet.