No products in the cart.
Roll over image to zoom in
Dwyer Mercoid FBLT-2SC-IVEF-30-50 Submersible Level Transmitter
$1,097
Dwyer Mercoid FBLT-2SC-IVEF-30-50 Submersible Level Transmitter Series FBLT Flush Tip Diaphram Submersible Level Transmitter. Perfect for dirty applications like Sludge and Slurries. Flush, non-clogging diaphragm great for dirty applications. Vent has maintenance free filter to prevent particalate or water drops from…
Dwyer Mercoid FBLT-2SC-IVEF-30-50 Submersible Level Transmitter Series FBLT Flush Tip Diaphram Submersible Level Transmitter. Perfect for dirty applications like Sludge and Slurries. Flush, non-clogging diaphragm great for dirty applications. Vent has maintenance free filter to prevent particalate or water drops from entering transmitter. Recommended Accessories: A-297 Dessicant Filter.
Specifications
| Component | Submersible Level Transmitter |
|---|---|
| (Instrument-Sensor) Output Signal Type | 4-20 Ma 2 Wire (Loop Powered) |
| (Instrument-Sensor) Measurement Accuracy | 0.25% |
| (Instrument-Sensor) Application | Dirty Liquids |
| (Instrument-Sensor) Type | Bullet Nose |
| (Instrument-Sensor) Type | Slim Bore |
| (Instrument-Sensor) Size | 1.1875" |
| (Instrument-Sensor) Span | 69' |
| Manufacturer | Dwyer Instruments |
| (Instrument – Sensor) Supply Voltage | 12 VDC |
| (Instrument – Sensor) Supply Voltage | 24 VDC |
| (Instrument-Sensor) Temperature Range | -4 °F – 176 °F |
Features
Long operating life with a non-clog flush diaphragm tip for harsh applications
Eliminates particulate or water droplets from entering the transducer using maintenance-free filter
Suits harsh environments with choice of polyether polyurethane or ETFE cable materials for excellent chemical compatibility
Increased life with lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty)
Meet application requirements with narrow body design allows the FBLT to fit into stilling wells and narrow installations
Unit holds up in aggressive fluids with robust FKM fluoroelastomer diaphragm that is PTFE coated for a stick-resistant surface
Avoid product leaks typically cause by oil or grease with diaphragm cavity that is filled with gel
Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use the A-625 hanging loop to attach a chain to remove from the installation
Reviews
There are no reviews yet.